Construction Products Regulation (CPR)
Intertek offers a comprehensive suite of Notified Body services in support of compliance to the EU Construction Products Regulation No 305/2011
The Construction Products Regulation (CPR) No 305/2011, is intended to make products arriving in any European Union country safe to use and install.
The added value of CE marking is that all EU countries must allow the selling of construction products bearing the CE mark. This means that public authorities cannot ask for any additional marks or certificates, let alone additional testing. Therefore you or the distributors of your product are able to trade your product in any country of the European Internal Market with the same documentation.
Together with the Declaration of Performance this will also help your customers and final users to check the performance of the product and compare it with other products under the same technical approach.
The CE marking contains certain essential information about the product and provides a link to other additional documents which also contain important information.
As a Notified Body in the EU, Intertek's scope covers products that require the highest category of validation - (AVCP (Assessment and verification of constancy of performance) System 1) which must involve the independent expertise of a Notified Body, and an FPC (Factory Production Control) audit.
The assessment of the product is done by defining the value of a list of characteristics called essential characteristics. You will find the full list in the annex ZA of the harmonised standards and in the European Assessment Documents (EAD). The list can be different for each intended use and in the case of your product with more than one intended use the list should cover the characteristics linked to each of them. The list also includes the AVCP system for each essential characteristic. The AVCP system applicable to each essential characteristic will require in some cases that a Notified Body performs some additional tasks
Intertek can issue the CE Marking in accordance with the following standards:
BUILDING HARDWARE | |
STANDARD CODE | DESCRIPTION |
EN 179 | Building hardware. Emergency exit devices operated by a lever handle or push pad, for use on escape routes |
EN 1125 | Building hardware. Panic exit devices operated by a horizontal bar for use on escape routes. |
EN 1154 | Building hardware. Controlled door closing devices |
EN 1155 | Building hardware. Electrically powered hold-open devices for swing doors. |
EN 1158 | Building hardware. Door coordinator devices. |
EN 1935 | Building hardware. Single-axis hinges |
EN 12209 | Building hardware. Locks and latches - Mechanically operated locks, latches and locking plates |
EN 14846 | Building Hardware. Emergency exit devices operated by a lever handle or push pad, for use on escape routes |
DOORS | |
STANDARD CODE | DESCRIPTION |
EN 13241 | Industrial, commercial and garage doors and gates - Product standard, performance characteristic |
EN 14351-1 | Windows and doors. Product standard, performance characteristics. Part 1: Windows and external pedestrian doorsets. |
EN 16034 | Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics |
CURTAIN WALLING | |
STANDARD CODE | DESCRIPTION |
EN 13830 | Curtain walling - Product standard |
GLASS IN BUILDING | |
STANDARD CODE | DESCRIPTION |
EN 572-9 | Glass in building. Basic soda lime silicate glass products. Evaluation of conformity/Product standard |
EN 1036-2 | Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product standard |
EN 1051-2 | Glass in building - Glass blocks and glass pavers - Part 2: Evaluation of conformity/Product standard |
EN 1096-4 | Glass in building - Coated glass - Part 4: Product standard |
EN 1279-5 | Glass in building - Insulating glass units - Part 5: Product standard |
EN 12150-2 | Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard |
EN 12337-2 | Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard |
EN 13024-2 | Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard |
EN 14178-2 | Glass in building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard |
EN 14179-2 | Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard |
EN 14321-2 | Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard |
EN 14449 | Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard |
EN 15681-2 | Glass in Building - Basic alumino silicate glass products - Part 2: Product standard |
EN 15682-2 | Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard |
EN 15683-2 | Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 2: Evaluation of conformity/Product standard |
EN 1748-1-2 | Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard |
EN 1748-2-2 | Glass in building - Special basic products - Glass ceramics - Part 2-2: Evaluation of conformity/Product standard |
EN 1863-2 | Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard |
THERMAL INSULATION PRODUCTS FOR BUILDINGS | |
STANDARD CODE | DESCRIPTION |
EN 13162 | Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification |
EN 13163 | Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification |
EN 13164 | Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification |
EN 13165 | Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification |
EN 13166 | Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification |
EN 13167 | Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification |
EN 13168 | Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification |
EN 13169 | Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification |
EN 13170 | Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification |
EN 13171 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification |
EN 14063-1 | Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation |
EN 14064-1 | Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation |
EN 14303 | Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification |
EN 14304 | Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification |
EN 14305 | Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification |
EN 14306 | Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification |
EN 14307 | Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification |
EN 14308 | Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification |
EN 14309 | Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification |
EN 14313 | Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification |
EN 14314 | Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification |
EN 14315-1 | Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam spray system before installation |
EN 14318-1 | Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation |
EN 14319-1 | Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam dispensed system before installation |
EN 14320-1 | Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam spray system before installation |
EN 14933 | Thermal insulation and light weight fill products for civil engineering applications - Factory made products of expanded polystyrene (EPS) - Specification |
EN 14934 | Thermal insulation and light weight fill products for civil engineering applications - Factory made products of extruded polystyrene foam (XPS) - Specification |
EN 15501 | Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Specification |
EN 15732 | Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA) |
EN 16069 | Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification |
How we can help you reach global markets
Many manufacturers are interested in finding out if their existing European products will meet the North American requirements. Intertek offers the support you need to help identify where pitfalls may be present. This can open up new markets for European companies previously discouraged from entering the market because of poor service from other providers and complex requirements. Intertek keeps it simple, and helps you grow globally into new markets all over the world. Our UK-based Conformity Assessment Body, accredited by UKAS, is dedicated to helping you achieve and sustain compliance with national regulations, both today and as they evolve.
Knowledge Center
Comprehensive Acoustical Testing Brochure
Remote Pre Inspections for NFPA 80 / 101
Protek - Safety. Everywhere. Every Day
Fire Doors 101: Your Guide to Testing and Certification - Webinar Recording
Tornado Testing & Certification Requirements - Webinar Recording
Plumbing Products Testing & Certification - Webinar Recording
The Evolving Code Evaluation Process White Paper
Proposition 65 & the Furniture Industry Webinar Recording
Why Planning for FCC Certification is Key to Success in the Door Hardware Industry White Paper
Upcoming Tradeshows & Events
Resources
- Search and Buy Building & Construction Standards
- SpecDirect
- Building Products Directory
- Project Connect (formerly myATI) – B&C Products
- Construction Hive – B&C Projects (PSIQest)
- My TestCentral