Charpy Impact ISO 179

Charpy Impact is a single point test that measures a materials resistance to impact from a swinging pendulum. Charpy impact is defined as the kinetic energy needed to initiate fracture and continue the fracture until the specimen is broken. The values obtained can be used for quality control or to differentiate general toughness.

Test Procedure:
The specimen is mounted horizontally and supported unclamped at both ends. The hammer is released and allowed to strike through the specimen. If breakage does not occur, a heavier hammer is used until failure occurs.

Specimen size:
Specimens are 80 x 10mm by thickness. The specimens can be either notched or unnotched.

Impact energy is expressed in joules. Impact strength is calculated by dividing impact energy in joules by the area under the notch. A higher number indicates a tougher material. 

**Please note that this test description is intentionally generic in nature and aimed at providing a descriptive summary to enhance test understanding. Due to copyright restrictions, we are not able to provide copies of standards. Standards can be obtained from appropriate standards authorities.

Contact Intertek