SUN - UL Subject 2593 and UL 325, Motor Driven Turnstile Operators and System and Door, Drapery, Gate, Louver, and Window Operators and Systems
Effective October 3, 2016
AMENDMENT – This Amendment extends the Effective Date from July 1, 2016 to October 3, 2016
UL 325 6th Edition dated October 14, 2013
Effective Date: October 3, 2016
Impact Statement: A review of all Listing Reports is necessary to determine which products comply with new/revised requirements and which products will require re-evaluation. NOTE: Effective immediately, this revised standard will be exclusively used for evaluation of new products unless the Applicant requests in writing that current requirements be used along with their understanding that their listings will be withdrawn on Effective Date of October 3, 2016 unless the product is found to comply with new/revised requirements.
Overview of Changes: A standard is available to evaluate UL 325 Listing Reports describing turnstile operator systems (requirements not in UL 325 but in Subject UL 2593) and Intertek will be applying those requirements to the UL 325 Reports.
The existing UL 325 Certification Reports covering only Motor Driven Turnstile Operators and Systems will be reissued as Certification Reports to Subject UL 2593.
Processing Schedule: So that production of products bearing Listing Marks will not be interrupted, the following schedule of approximate dates has been established to ensure Listing Reports are found compliant by Effective Date:
- October 3, 2016 = Effective Date – ATM Suspended for all non-compliant Reports
Fees: An initial review of Listing Report (s) will be covered by a direct billing project and will be invoiced at not more than $1000 per report.
Client Action Required:
Information – To assist our Intertek Engineer with review of your Certification Reports, please submit technical information in response to the new/revised paragraphs noted in the attached or explain why these new/revised requirements not apply to your product (s).
Current Listings Not Active? – Please immediately identify any current Listing Reports or products that are no longer active and should be removed from our records. We will do this at no charge as long as Intertek is notified in writing prior to the review of your reports.