SUN - Subject 2593, (Outline of Investigation) Motor Driven Turnstile Operators and Systems

Effective July 1, 2016

Standard Information
Standard Number:
Subject 2593
Standard Name:
(Outline of Investigation) Motor Driven Turnstile Operators and Systems:
Standard Edition and Issue Date:
3rd Edition Dated April 26, 2011
Date of Revision:
No Revision to the 3rd Edition
Date of Previous Revisions to Standard:
2nd Edition
 
Effective Date of New/Revised Requirements

Effective Date (see Schedule below): July 1, 2016

 
Impact, Overview, Fees and Action Required

Impact Statement: A review of all Listing Reports is necessary to determine which products comply with new/revised requirements and which products will require re-evaluation. NOTE: Effective immediately, this revised standard will be exclusively used for evaluation of new products unless the Applicant requests in writing that current requirements be used along with their understanding that their listings will be withdrawn on Effective Date of July 1, 2016 unless the product is found to comply with new/revised requirements.

Overview of Changes: A standard is available to evaluate UL 325 Listing describing turnstile (requirements not in UL 325 but in Subject UL 2593 and Intertek will be applying those requirements.

Processing Schedule: So that production of products bearing Listing Marks will not be interrupted, the following schedule of approximate dates has been established to ensure Listing Reports are found compliant by Effective Date:

  • July 1, 2016 = Effective Date – ATM Suspended for all non-compliant Reports

Fees: An initial review of Listing Report (s) will be covered by a direct billing project and will be invoiced at not more than $1000 per report.

Client Action Required:

Information - To assist our Intertek Engineer with review of your Certification Reports, please submit technical information in response to the new/revised paragraphs noted in the attached or explain why these new/revised requirements not apply to your product (s).

Current Listings Not Active? – Please immediately identify any current Listing Reports or products that are no longer active and should be removed from our records. We will do this at no charge as long as Intertek is notified in writing prior to the review of your reports.