Peel Resistance of Adhesive (T-Peel Test) ASTM D1876

Determine the relative peel resistance of adhesive bonds between flexible Adherends using a T-type specimen.

Scope:
The T-peel test (ASTM D1876) evaluates the force required to the progressively separate two bonded, flexible adherends. Variations in test specimen preparation such adhesive curing, adhesive thickness, adherends and conditioning provides insight for optimization in processes and application.

Test Procedure:
Clamp each ends of the t-peel specimen in separate test grips of the universal tester / tension testing machine. Separate the specimen at a rate of 127 mm (5.0 in) /min for (5-in.) length of the bond line.

Specimen size:
Specimens are cut from a T-peel panel to 25.4 mm (1.0 in) long x 300 mm (12 in) wide. Ten specimens are tested.

Data:
Peel Load, Peel Strength (lb/in) and Type of Failure

 
Need help or have a question? +1 413 499 0983
 

Need help or have a question?

+1 413 499 0983
Wilton UK:
+44 1642 435 788
Benelux:
+31 88 126 8888
France:
+33 (0) 385 99 12 80
APAC:
+65 6805 4800
Germany:
0800 5855888
+49 711 27311 152
Switzerland:
+41 61 686 4800
Mexico:
01 800 5468 3783
+52 55 5091 2150
Brazil:
+55 11 2322 8033
Australia:
+61 1300 046 837
India:
+91 (22) 4245 0204