Intertek offers a comprehensive suite of Notified Body services in support of compliance to the EU Construction Products Regulation No 305/2011

The Construction Products Regulation (CPR) No 305/2011, is intended to make products arriving in any European Union country safe to use and install. The regulation, repeals the Construction Products Directive (CPD) No 89/106/EEC.

To sell products within the EU, it is mandatory to apply the CE mark showing products comply with all applicable Directives such as the CPR, EMC, and the Low Voltage Directive (LVD). The CPR has 4 levels of product verification that start at self-declaration (System 4) and end in product validation by a Notified Body (System 1+, System 1 and System 2+).

As a Notified Body in the EU, Intertek's scope covers products that require the highest category of validation - (AVCP System 1) which must involve the independent expertise of a Notified Body, and an FPC (Factory Production Control) audit.

The European Union recognizes that products vary greatly in their ‘risks’ to the users and the public. They have defined 6 essential requirements or characteristics which need to be addressed (by committee) and satisfied, when relevant, by the product prior to being put on the market.

Essential Requirements

  1. Mechanical resistance and stability
  2. Safety in the case of fire
  3. Hygiene, health and the environment
  4. Safety in use
  5. Protection against noise
  6. Energy economy and heat retention
  7. Sustainable use of natural resources

Product family \ Product \ Intended use

Technical specifications

Flat glass, profiled glass and glass- block products (4/6) / Glass-block / for use as anti-bullet or anti-explosion glazing, Flat glass, profiled glass and glass-block products (4/6) / Flat or curved glass panels / for use as anti- bullet, or anti-explosion glazing, Flat glass, profiled glass and glass-block products (4/6) / Insulating glass units / for use as anti-bullet, or anti-explosion glazing, Flat glass, profiled glass and glass-block products (4/6) / Glass- block wall panels / for use as anti- bullet or anti-explosion glazing

EN 1036-2:2008

EN 1051-2-2007

EN 1051-2:2007

EN 1096-4:2018

EN 12150-2:2004

EN 12337-2:2004

EN 1279-5:2005+A2:2010

EN 1279-5:2018

EN 13024-2:2004

EN 14178-2:2004

EN 14179-2:2005

EN 14321-2:2005

EN 14449:2005

EN 14449:2005/AC:2005

EN 15681-2:2017

EN 15682-2:2013

EN 15683-2:2013

EN 1748-1-2:2004

EN 1748-2-2:2004

EN 1863-2:2004

EN 572-9:2004

Curtain wallings (1/1) / Curtain wall kits / as external walls subject to reaction to fire requirements

EN 13830:2003

Thermal insulating products (2/2) / Thermal insulating products (factory- made products and products intended to be formed in-situ) / for uses subject to regulations on reaction to fire

EN 13162:2012

EN 13162:2012+A1:2015

EN 13163:2012

EN 13163:2012+A1:2015

EN 13164:2012

EN 13164:2012+A1:2015

EN 13165:2012

EN 13165:2012+A1:2015

EN 13165:2012+A2:2016

EN 13166:2012

EN 13166:2012+A1:2015

EN 13166:2012+A2:2016

EN 13167:2012

EN 13167:2012+A1:2015

EN 13168:2012

EN 13168:2012+A1:2015

EN 13169:2012

EN 13169:2012+A1:2015

EN 13170:2012

EN 13170:2012+A1:2015

EN 13171:2012

EN 13171:2012+A1:2015

EN 14063-1:2004

EN 14063-1:2004/AC:2006

EN 14064-1:2010

EN 14303:2009+A1:2013

EN 14304:2009+A1:2013

EN 14305:2009+A1:2013

EN 14306:2009+A1:2013

EN 14307:2009+A1:2013

EN 14308:2009+A1:2013

EN 14309:2009+A1:2013

EN 14313:2009+A1:2013

EN 14314:2009+A1:2013

EN 14315-1:2013

EN 14318-1:2013

EN 14319-1:2013

EN 14320-1:2013

EN 14933:2007

EN 14934:2007

EN 15501:2013

EN 15732:2012

EN 16069:2012

EN 16069:2012+A1:2015

Doors, windows, shutters, blinds, gates and related building hardware (1/1) / Doors and gates (with or without related hardware) / fire/smoke compartmentation and on escape routes, Doors, windows, shutters, blinds, gates and related building hardware (1/1) / Building hardware related to doors, gates and windows / fire/smoke compartmentation and on escape routes, Doors, windows, shutters, blinds, gates and related building hardware (1/1) / Windows (with or without related hardware) / fire/smoke compartmentation and on escape routes

EN 1125:2008

EN 1154:1996

EN 1154:1996/A1:2002

EN 1154:1996/A1:2002/AC: 2006

EN 1155:1996/A1:2002/AC: 2006

EN 1155:1997

EN 1155:1997/A1:2002

EN 1158:1997

EN 1158:1997/A1:2002

EN 1158:1997/A1:2002/AC: 2006

EN 12209:2003

EN 12209:2003/AC:2005

EN 13241-1:2003+A1:2011

EN 13241:2003+A2:2016

EN 14351-1:2006+A1:2010

EN 14351-1:2006+A2:2016

EN 14846:2008

EN 16034:2014

EN 179:2008

EN 1935:2002

EN 1935:2002/AC:2003

 

Technical Specification Product Family, Product/Intended Use
EN 54-16:2008 Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Control and indicating devices (fire safety).
EN 54-2:1997
EN 54-2:1997/A1:2006
EN 54-2:1997/AC:1999
EN 14604:2005 Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Alarm devices (fire safety).
EN 14604:2005/AC:2008
EN 54-23:2010
EN 54-3:2001/A1:2002
EN 54-3:2001/A2:2006
EN 54-4:1997 Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Power supplies (fire detection/alarm components) (fire safety).
EN 54-4:1997/A1:2002
EN 54-4:1997/A2:2006
EN 54-4:1997/AC:1999
EN 54-10:2002 Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Smoke, heat and flame detectors (fire safety).
EN 54-10:2002/A1:2005
EN 54-12:2002
EN 54-12:2015
EN 54-20:2006
EN 54-20:2006/AC:2008
EN 54-5:2000/A1:2002
EN 54-7:2000/A1:2002
EN 54-7:2000/A2:2006
EN 54-7:2000/A1:2002
EN 54-7:2000/A2:2006
Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Foam systems-kits (fire safety).
EN 54-11:2001 Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Manual call points (fire safety).
EN 54-11:2001/A1:2005
EN 54-17:2005 Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Short circuit isolators (fire safety).
EN 54-17:2005/AC:2007
EN 54-18:2005 Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Input/output devices (fire safety). and explosion suppression products (1/1) : - Input/output devices (fire safety).
EN 54-18:2005/AC:2007
EN 54-24:2008
EN 54-25:2008
EN 54-25:2008/AC:2010
EN 54-25:2008/AC:2012
EN 54-20:2006 Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Combined fire detection and fire alarm systems-kits (fire safety).
EN 54-20:2006/AC:2008
EN 54-21:2006 Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Alarm transmission routing devices (fire safety), Fire alarm systems-kits (fire safety).
EN 13830:2003 Curtain wallings (1/1) : - Curtain wall kits (as external walls subject to reaction to fire requirements).
EN 1125:2008 Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Building hardware related to doors, gates and windows (fire/smoke compartmentation and on escape routes).
EN 1154:1996/A1:2002
EN 1154:1996/A1:2002/AC:200
EN 1155:1996/A1:2002/AC:200
EN 1155:1997/A1:2002
EN 1158:1997/A1:2002
EN 1158:1997/A1:2002/AC:200 EN 12209:2003
EN 12209:2003/AC:2005
EN 14846:2008
EN 179:2008
EN 1935:2002
EN 1935:2002/AC:2003
EN 13241:2003+A2:2016 Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Doors and gates (with or without related hardware) (fire/smoke compartmentation and on escape routes).
EN 14351-1:2006+A2:2016
EN 16034:2014
EN 16034:2014 Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Windows (with or without related hardware) (fire/smoke compartmentation and on escape routes).

How we can help you reach global markets

Many manufacturers are interested in finding out if their existing European products will meet the North American requirements. Intertek offers the support you need to help identify where pitfalls may be present. This can open up new markets for European companies previously discouraged from entering the market because of poor service from other providers and complex requirements. Intertek keeps it simple, and helps you grow globally into new markets all over the world.

Related Links

Fact Sheet: CE Marking Certification

CE Certification is a declaration that a product meets all applicable legal provisions set by the European Union under the CE Marking requirements.

CE Marking Guides

Download Guides to CE Marking under the new Construction Products Directive:

EN 54-24:2008 Standard

Builder's Hardware

Fire Detection Equipment

ETL and WH Mark  
The ETL Listed Mark is the fastest growing certification mark in North America, widely accepted by AHJs and building code officials.

The Warnock Hersey (WH) Mark has long been the building product industry's preferred certification mark, found on more than 6,500 products ranging from fire doors to plumbing and construction products.

View All Our Global Certifications and Marks

Contact Intertek